Protector Guardrail · D228.XBU · 90°F · 50×50×5
Ultra X-Base
enquire about this configuration
rotate model
Drag to rotate · click a component to identify it · right-click to isolate or hideDrag to rotate · tap a component to identify it · long-press for isolate and hide
Interactive 3D model of Ultra X-Base · foldable (flat @ 90°) · 50×50×5 ballast tiles. Rotate with the arrow keys, zoom with the plus and minus keys, and press Escape to clear the selected part. The parts list on this page names every component and can select, isolate or hide it without the model.
drawing code
D228.XBU.1500.1500.NB
d228-xbu-1500-1500-50-50-05-f
parts
54
assembly mass
151.8kg
enquiries
enquire about this configurationdownloads — no account needed
documents
This family has no drawing sheet of its own — the shared drawings below cover it.
3 declarations of performance set out the wind and imposed-load values for each ballast configuration, alongside the installation manual and the shared technical drawings.
specs
- drawing series
- Ultra X-Base (foldable (flat @ 90°))
- module pitch
- 1500 mm
- post spacing
- 1500 mm
- angle
- 90°
- base type
- Ultra X-Base
- ballast tiles
- 50×50×5
- foldable
- yes
- parts
- 54
- 9aluminium
- 5concrete
- 15plastic
- 21steel
- 4unspecified
Ultra X-Base configuration with a folding upright on 1500 mm post centres, ballasted on 50×50×5 tiles. One module weighs 151.8 kg and covers 1500 mm of edge — 101.2 kg per metre to carry up and lay out. Among the 12 configurations in this family it sits 4th by mass, between 151.8 and 294.4 kg; 5 ballast tiles are 142.6 kg of that, 94% of the assembly, lifted 28.5 kg at a time.
ballast and loading
Derived from this configuration's bill of materials — tile count and part mass as the payload states them, nothing assumed.
- ballast tilesD228.BT.50.50.05
- 5 × 50×50×5
- mass per tilehandled one tile at a time
- 28.5 kg
- ballast mass94% of assembly mass
- 142.6 kg
- assembly mass
- 151.8 kg
- mass per metre of edgeone 1500 mm module
- 101.2 kg/m
Bearing pressure is not published here: it needs the contact area of the feet and a load case, and the published data carries neither. Take the figures above to your structural engineer.
what this option costs
foldable post
The post folds down for seasonal roof access. Against the fixed Ultra X-Base · 90° upward · 50×50×5 ballast tiles the published bill of materials is identical, so folding changes how the guardrail is handled, not what it weighs.
Folding and raising uses the Guardrail Deployment Tool (D228.GDT.1), which is a separate catalogue part and is not included in this configuration. deployment tool detail
otherUltra X-Base configurations
12 configurations share this family — grouped by ballast tile size.
50×50×5
- 70° upward
- foldable @ 70°
- 90° upward
- foldable (flat @ 90°)
50×50×5 stacked
talk to us about this configuration
Every drawing, part and figure on this site is published openly — no account, no gated download. Ask us about lead times, quantities for a run of edge, or anything the catalogue does not answer.
designed to protect, built to last